1. Forum
  2. Usenet Intenat
  3. ALT.BBS.SYNCHRONET

  • wget does not work

    From Digital Man@1:229/2 to All on Thursday, December 31, 2020 12:49:01
    From: digital.man@vert.synchro.net.remove-73p-this

    To: Dumas Walker
    Re: wget does not work
    By: Dumas Walker to DIGITAL MAN on Thu Dec 31 2020 03:30 pm

    FYI, if you are sitting at a linux prompt, and run this command:

    wget https://gitlab.synchro.net/main/sbbs/-/raw/master/install/GNUmakefile

    I think I just figured out the problem. I used a '~' instead of a '-' in one of the address "nodes" there. I bet that is what did it! :)

    Yeah, I just tested it and it worked fine.

    Sorry!

    No problem. Copy/paste the text for fewer typos?
    --
    digital man

    Synchronet "Real Fact" #16:
    Synchronet first supported FidoNet networking (with SBBSFIDO) in 1992.
    Norco, CA WX: 62.9øF, 27.0% humidity, 1 mph SSW wind, 0.00 inches rain/24hrs --- Synchronet 3.18c-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net

    --- SoupGate-Win32 v1.05
    * Origin: www.darkrealms.ca (1:229/2)
  • From Dumas Walker@1:229/2 to All on Thursday, December 31, 2020 13:39:29
    From: dumas.walker@CAPCITY2.remove-35s-this

    To: digital man
    FYI, if you are sitting at a linux prompt, and run this command:

    wget https://gitlab.synchro.net/main/sbbs/-/raw/master/install/GNUmakefile

    It will pull down a "you need to log onto gitlab" web page and save it as the makefile rather than getting the actual makefile. I got around it by right clicking the link on the wikipage and doing a save-as.

    Figured it out when make barfed on line 1, which was an html tag and not the separator it was expecting.

    #

    ---
    þ Synchronet þ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP --- Synchronet 3.18c-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net

    --- SoupGate-Win32 v1.05
    * Origin: www.darkrealms.ca (1:229/2)
  • From Dumas Walker@1:229/2 to All on Thursday, December 31, 2020 15:30:00
    From: dumas.walker@CAPCITY2.remove-35s-this

    To: DIGITAL MAN
    FYI, if you are sitting at a linux prompt, and run this command:

    wget https://gitlab.synchro.net/main/sbbs/-/raw/master/install/GNUmakefile

    I think I just figured out the problem. I used a '~' instead of a '-' in
    one of the address "nodes" there. I bet that is what did it! :)

    Sorry!


    * SLMR 2.1a * Beware programmers carrying screwdrivers.

    ---
    þ Synchronet þ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP --- Synchronet 3.18c-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net

    --- SoupGate-Win32 v1.05
    * Origin: www.darkrealms.ca (1:229/2)
  • From Dumas Walker@1:229/2 to All on Friday, January 01, 2021 09:17:00
    From: dumas.walker@CAPCITY2.remove-kzw-this

    To: DIGITAL MAN
    Sorry!

    No problem. Copy/paste the text for fewer typos?

    I was using links2 at the time. It says you can copy/paste out of the
    window but it does not seem to work... you highlight the text, copy it, and then what you paste will be the same sized blank space. :) I am probably missing a package or some subtle nuance there.

    I was in firefox where I could cut and paste when I figured out my error.


    * SLMR 2.1a * ...gnorw og... gnorw og... gnorw og nac gnihton

    ---
    þ Synchronet þ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP --- Synchronet 3.18c-Win32 NewsLink 1.113
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net

    --- SoupGate-Win32 v1.05
    * Origin: www.darkrealms.ca (1:229/2)