You can now run "jsexec binkit install", but it seems you're already past that point.
d:\bbs\sbbs\binkd\outbound\014a0001.dlo
3/10 09:43:47a Callout to 3:330/1@fidonet started.
3/10 09:44:02a Connection to f1.n330.z3.binkp.net:24554 failed.
This means that node 3:330/1 is not DNS-resolveable. You'll need to add a "Host=" key for that node in your ctrl/binkit.ini file.
3/10 09:44:17a Callout to 1:15/0@fidonet started.
3/10 09:44:17a Connection to f0.n15.z1.binkp.net:24554 failed.
3/10 09:44:17a Attempting poll for node 3:770/1@fidonet
3/10 09:44:17a Callout to 3:770/1@fidonet started.
3/10 09:44:25a Will encrypt session.
3/10 09:44:25a Initializing crypt keys.
3/10 09:44:25a Remote disconnected
3/10 09:44:25a Timed event: BINKPOLL returned 0
That seems to have worked. If you enable debug log level, you'll get more details, but I see no obvious problem with this session.
I did try 1:340/400 but said bad password but I have been useing it
More details will be needed from you. Like debug log output, the revision of exec/binkit.js and load/binkp.js
the mailer
you're communicating with.
http://wiki.synchro.net/module:binkit
Re: Help with binkit.js/binkp
By: Digital Man to Sneaky on Fri Mar 09 2018 16:22:05
Hi Digital Man
You can now run "jsexec binkit install", but it seems you're already past that point.
Yes I did that I think or sbbsexe.zip but cannot remember puting binkit.ini in ctrl so I must of ran that command.
d:\bbs\sbbs\binkd\outbound\014a0001.dlo
3/10 09:43:47a Callout to 3:330/1@fidonet started.
3/10 09:44:02a Connection to f1.n330.z3.binkp.net:24554 failed.
This means that node 3:330/1 is not DNS-resolveable. You'll need to add a "Host=" key for that node in your ctrl/binkit.ini file.
yep got it I think ie
[1:15/0]
Host=region15.net
Port=24554
Password=pass
Poll=yes
OutboundRoot=d:/sbbs/binkd/outbound
although I am having trouble wit othernets shoud I be doing this
might have the outbound qwrong though
Example ftn_domains.ini
[fidonet]
Zones=1,2,3,4,5,6
OutboundRoot=/sbbs/fido/outbound/
NodeList=/sbbs/fido/nodelist/nodelist.123
[othernet]
Zones=10
NodeList=/sbbs/fido/OTHERNET.234
if so does it go in ctrl ??
3/10 09:44:17a Attempting poll for node 3:770/1@fidonet
3/10 09:44:17a Callout to 3:770/1@fidonet started.
3/10 09:44:25a Will encrypt session.
3/10 09:44:25a Initializing crypt keys.
3/10 09:44:25a Remote disconnected
3/10 09:44:25a Timed event: BINKPOLL returned 0
That seems to have worked. If you enable debug log level, you'll get more details, but I see no obvious problem with this session.
there is 2 that work time.synchro.net and 3:770/1
and you are going to tell me off here but how do I enabble debug level
so I can sent it to you thanks
I did try 1:340/400 but said bad password but I have been useing it
I changed the password first letter upperclass rest lower case and worked
More details will be needed from you. Like debug log output, the revision of exec/binkit.js and load/binkp.js
Yes I will try to give you more info after I can work debug log
I just download both today
binkp.js load dir // $Id: binkp.js,v 1.77 2018/03/10 20:14:02 rswindell Exp $ binkit.js exec dir // $Id: binkit.js,v 1.56 2018/03/10 20:13:55 rswindell Exp $
the mailer
you're communicating with.
I am usiing sbbsecho.exe dated the 01/19/18 not sure of version sorry
if that what your are asking and run it via the synchronet contoll panel/events
Hi all
I would like same help with bink.js/binkp setup that has came
with the lastest sbbs just link to now the proccess to get it
flowing i now there is binkpoll in time event and in service confing
put tick on binkp and key to true but must be a bit more than
that for setting it up
I tryed a binkpoll and got a coyuple of packet with is cool
this in my control window ie
3/10 09:43:22a BBS Events thread started
3/10 09:43:47a Semaphore signaled for Timed Event: BINKPOLL
3/10 09:43:47a Running timed event: BINKPOLL
3/10 09:43:47a Running outbound
3/10 09:43:47a Attempting callout for file d:\bbs\sbbs\binkd\outbound\014a0001.dlo
3/10 09:43:47a Callout to 3:330/1@fidonet started.
3/10 09:44:02a Connection to f1.n330.z3.binkp.net:24554 failed.
3/10 09:44:02a Attempting callout for file d:\bbs\sbbs\binkd\outbound.2cf\02260001.clo
3/10 09:44:17a Attempting poll for node 1:15/0@fidonet
3/10 09:44:17a Callout to 1:15/0@fidonet started.
3/10 09:44:17a Connection to f0.n15.z1.binkp.net:24554 failed.
3/10 09:44:17a Attempting poll for node 3:770/1@fidonet
3/10 09:44:17a Callout to 3:770/1@fidonet started.
3/10 09:44:25a Will encrypt session.
3/10 09:44:25a Initializing crypt keys.
3/10 09:44:25a Remote disconnected
3/10 09:44:25a Timed event: BINKPOLL returned 0
I did try 1:340/400 but said bad password but I have been useing it for years any suggestions
so I just like to now the steps js to download updated ones and any cfg/ini to edit
How does this look
fidonet]
Zones=1,2,3,4,5,6
OutboundRoot=D:\bbs\sbbs\binkd\outbound\ NodeList=d:\bbs\sbbs\fido\nodelist\nodelist.068
[fsxnet]
Zones=21
NodeList=d:\bbs\sbbs\fido\nodelist\fsxnet.075
[sportsnet]
Zones=24
NodeList=d:\bbs\sbbs\fido\sportnet.068
SBBSecho is a tosser (echomail program). I was asking about the mailer (e.g. >IRex, BinkD, D'bridge, etc.) that you're having troubles communicating with >(over BinkP).
oh okay sorry it's Binkd 1.1a-92 binkd but not at the same time as binkit thougth
My error lists
{Informational}
and please note the ****
3/12 01:06:50p Attempting callout for file d:\bbs\sbbs\binkd\outbound.015\00010064.clo
3/12 01:06:50p JSBinkP/1.78 callout to 21:1/100@fsxnet started
3/12 01:06:50p Sent M_NUL command args: OPT CRYPT
3/12 01:06:50p Peer version: binkd/1.1a-89/Win32 binkp/1.1
3/12 01:06:50p Got M_ADR command args: 3:57/0@fidonet 3:770/1@fidonet 3:770/0@fidonet 3:772/1@fidonet 3:772/0@fidonet 21:1/1@fsxnet 24:40/1@sportnet 24:40/0@sportnet 24:400/1@sportnet 24:400/0@sportnet 39:970/0@amiganet 46:3/103@agoranet
3/12 01:06:50p Sent M_PWD command args: CRAM-MD5-7a9b86617bb6ed041fe229fddb720839
3/12 01:06:51p Got M_NUL command args: TRF 0 1026
3/12 01:06:51p Got M_NUL command args: OPT EXTCMD CRYPT GZ BZ2
3/12 01:06:51p Will encrypt session.
3/12 01:06:51p Got M_OK command args: secure
3/12 01:06:51p Unconfigured address 3:57/0@fidonet
3/12 01:06:51p Unconfigured address 3:770/1@fidonet
3/12 01:06:51p Unconfigured address 3:770/0@fidonet
3/12 01:06:51p Unconfigured address 3:772/1@fidonet
3/12 01:06:51p Unconfigured address 3:772/0@fidonet
3/12 01:06:51p Unconfigured address 21:1/1@fsxnet
3/12 01:06:51p Unconfigured address 24:40/1@sportnet
3/12 01:06:51p Unconfigured address 24:40/0@sportnet
3/12 01:06:51p Unconfigured address 24:400/1@sportnet
3/12 01:06:51p Unconfigured address 24:400/0@sportnet
3/12 01:06:51p Unconfigured address 39:970/0@amiganet
3/12 01:06:51p Unconfigured address 46:3/103@agoranet
3/12 01:06:51p Initializing crypt keys.
3/12 01:06:51p Got M_FILE command args: 6DF6919A.MO5 1026 1520812824 0
3/12 01:06:51p Receiving file: D:\bbs\sbbs\temp\event\6DF6919A.MO5 (1.0KB)
3/12 01:06:51p Sent M_EOB command args:
3/12 01:06:51p Got data frame length 1026
3/12 01:06:51p Received file: D:\bbs\sbbs\temp\event\6DF6919A.MO5 (1.0KB)
*********3/12 01:06:51p Moving 'D:\bbs\sbbs\temp\event\6DF6919A.MO5' to *******'d:\bbs\sbbs\binkd\secfiles\6DF6919A.MO5'. this pkt is 3:770/1 not 21:1/100
3/12 01:18:31p Initializing crypt keys.
***> 3/12 01:18:31p Got M_FILE command args: 6DF6919A.MO6 1677 1520813644 0
*** this is 3:770/1 not 21:1/100
[1:15/0]
Host=region15.net
Port=24554
Password=pass
Poll=yes
OutboundRoot=d:/sbbs/binkd/outbound
Yup, looks good.
there is 2 that work time.synchro.net and 3:770/1
and you are going to tell me off here but how do I enabble debug level
so I can sent it to you thanks
LogLevel=Debugging in ctrl/sbbs.ini.
http://wiki.synchro.net/config:sbbs.ini#global
I am usiing sbbsecho.exe dated the 01/19/18 not sure of version sorry
if that what your are asking and run it via the synchronet contoll panel/events
SBBSecho is a tosser (echomail program). I was asking about the mailer (e.g. >IRex, BinkD, D'bridge, etc.) that you're having troubles communicating with >(over BinkP).
3/12 01:06:50p JSBinkP/1.78 callout to 21:1/100@fsxnet started
+1300 3/12 01:06:50p Got M_NUL command args: VER binkd/1.1a-89/Win32
NodeList=d:\bbs\sbbs\fido\nodelist\nodelist.068 NodeList=d:\bbs\sbbs\fido\nodelist\fsxnet.075 NodeList=d:\bbs\sbbs\fido\sportnet.068
Re: Help with binkit.js/binkp
By: Sneaky to Digital Man on Mon Mar 12 2018 01:45 pm
3/12 01:06:50p JSBinkP/1.78 callout to 21:1/100@fsxnet started
+1300 3/12 01:06:50p Got M_NUL command args: VER binkd/1.1a-89/Win32
Looks like your calling 21:1/100 and expecting his mystic mailer but getting binkd?
If so you need to add the port to the [21:1/100] section of your binkit.ini. Something like..
[21:1/100]
Host=agency.bbs.nz
Port=24560
Password=SECRET
Poll=true
Port=24556
Password=SECRET
Poll=true
I'm not sure what port his mystic mailer answers on but it's non
standard.
I'd be interested in hearing about how this progresses. When polling a mystic mailer with the binkout or binkpoll events I find it works well.
When the service answers we get an insecure session because we can't
seem to deal with the CRAM-MD5 response we get from mystic. Working on that.. :)
[sportsnet]
Zones=24
NodeList=d:\bbs\sbbs\fido\sportnet.068
I don't use a ftn_domains.ini (not use nodelists or FTN domains), so I'm >guessing its fine. <shrug>
If you use the stand outbound directory structure and don't need nodelists, >then you don't really need an ftn_domains.ini file.
I was asking about mailer you're communicating with (the remote link), not >*your* mailer. Anyway, I see it below in the "VER" and "Peer version" log
lines: BinkD.
My error lists
I didn't find any errors in the log output. When you say "error lists", what >errors are you referring to?
I'm not sure what you're trying to tell me again. Please clarify.
I saw nothing else in the log output you pasted which resembled an error or a >question.
I'm not sure what you're trying to tell me. A .M05 files is bundle, not a >packet. Are you saying the packets within this bundle were *from* 3:770/1? If >so, is that a problem?
I don't use a ftn_domains.ini (not use nodelists or FTN domains), so I'm >guessing its fine. <shrug>
If you use the stand outbound directory structure and don't need nodelists, >then you don't really need an ftn_domains.ini file.
I think I now what you mean binkit.ini is just outbound
ftn_domains.ini outbound is outbound.001 015 etc.
but probable wrong with that as well
with same changes to fsxnet host for it to connect I will run binkit for day or so,
seems to be connection to all host so see how it goes for this week
but a question here binkit.ini in path d:\bbs\sbbs\binkp\outbound
question :is there any thing in sbbsecho.ini I have to do ie mailer type is binkley\flow
and all dirs are right in sbbsecho.ini, as I cannot sent anything
question: do I have to run binkout first then binkpoll or does binkpoll do both.
I was asking about mailer you're communicating with (the remote link), not >*your* mailer. Anyway, I see it below in the "VER" and "Peer version" log
lines: BinkD.
Okay yes I connect to mystic/binkd but you probably now the ver now.
My error lists
I didn't find any errors in the log output. When you say "error lists", what >errors are you referring to?
I'm not sure what you're trying to tell me again. Please clarify.
I saw nothing else in the log output you pasted which resembled an error or a >question.
again sorry, to me is was errors
but you was different probably didn't see
any so really what I should have asked what there any thing in those logs to say that every thing working and connection okay or if samething wrong what I should do
to fix it, but apart from binkout not working for me I think other things going fine.
I'm not sure what you're trying to tell me. A .M05 files is bundle, not a >packet. Are you saying the packets within this bundle were *from* 3:770/1? If >so, is that a problem?
again sorry about this question, I have sorted this one out thanks
I think I now what you mean binkit.ini is just outbound
ftn_domains.ini outbound is outbound.001 015 etc.
but probable wrong with that as well
The outbound.<hexnum> is a standard, called Binkley-Style-Outbound (or BSO).
Both BinkIT and SBBSecho will use the correct outbound directory for all zones >without needing an ftn_domains.ini file.
question :is there any thing in sbbsecho.ini I have to do ie mailer type is >> binkley\flow
and all dirs are right in sbbsecho.ini, as I cannot sent anything
The outbound directory in sbbsecho.ini must match what you have set in >binkit.ini ("binkit install" does this automatically).
question: do I have to run binkout first then binkpoll or does binkpoll do both.
binkout runs only automatically when you have outbound echomail or netmail. >>binkout will perform an outbound run and poll.
binkpoll just runes periodicalliy just in case there was no new outbound mail >>or an incoming connections from the uplink (hub). They should be setup with >>timed events and run automatically when/as needed.
No, I didn't see it in the log output.I was asking about mailer you're communicating with (the remote link), not >> >*your* mailer. Anyway, I see it below in the "VER" and "Peer version" log >> > lines: BinkD.
Okay yes I connect to mystic/binkd but you probably now the ver now.
again sorry, to me is was errors
It's called a "log".
Okay, so you "binkout not working". Can you elaborate?
I think I now what you mean binkit.ini is just outbound
ftn_domains.ini outbound is outbound.001 015 etc.
but probable wrong with that as well
The outbound.<hexnum> is a standard, called Binkley-Style-Outbound (or BSO).
okay so is my setting in sbbsecho.ini binkley\flo right then.
Both BinkIT and SBBSecho will use the correct outbound directory for all zones >without needing an ftn_domains.ini file.
question :is there any thing in sbbsecho.ini I have to do ie mailer type is >> binkley\flow
and all dirs are right in sbbsecho.ini, as I cannot sent anything
The outbound directory in sbbsecho.ini must match what you have set in >binkit.ini ("binkit install" does this automatically).
okay in sbbsecho.ini outbound is d:\bbs\sbbs\binkd\outbound\
in binkit.in outbound is OutboundRoot=d:\bbs\sbbs\binkd\outbound\
question will I have to remove binkit and do a reinstall.
question: do I have to run binkout first then binkpoll or does binkpoll do both.
binkout runs only automatically when you have outbound echomail or netmail. >>binkout will perform an outbound run and poll.
it may run binkout automatically when you have outbound echomail but
my question is why won't it send the pkt out
binkpoll just runes periodicalliy just in case there was no new outbound mail >>or an incoming connections from the uplink (hub). They should be setup with >>timed events and run automatically when/as needed.
in time events for both set at 24 hours
Okay, so you "binkout not working". Can you elaborate?
what I am saying here is when I run binkout it goes through the processes to connecting to
links but won't pick up the pkt and send it in otherward I can receive but cannot send pkts
here is my logs
Binkout
3/14 09:44:49a Attempting callout for file d:\bbs\sbbs\binkd\outbound.015\00010064.clo
3/14 09:44:49a JSBinkP/1.78 callout to 21:1/100 started
3/14 09:44:49a Connection to f100.n1.z21.binkp.net:24554 failed.
3/14 09:44:49a Unlocking d:\bbs\sbbs\binkd\outbound.015\00010064.bsy.
3/14 09:44:49a No flow files to be processed.
3/14 09:44:49a Done checking in d:\bbs\sbbs\binkd\outbound.015\.
3/14 09:44:49a Running outbound dir d:\bbs\sbbs\binkd\outbound.018\
3/14 09:44:49a Locking d:\bbs\sbbs\binkd\outbound.018\01900001.bsy
3/14 09:44:49a Lock successful.
binkpoll
/14 09:47:09a Attempting poll for node 21:1/100@fidonet
3/14 09:47:09a JSBinkP/1.78 callout to 21:1/100@fidonet started
3/14 09:47:09a Sent M_NUL command args: OPT CRYPT
3/14 09:47:09a Sent M_NUL command args: SYS 1st Choice Core
3/14 09:47:09a Sent M_NUL command args: ZYZ Ian Segers
3/14 09:47:09a Sent M_NUL command args: LOC Ashburton, Nz
3/14 09:47:09a Sent M_NUL command args: NDL 115200,TCP,BINKP
3/14 09:47:09a Sent M_NUL command args: TIME Wed Mar 14 2018 09:47:09 GMT+1300 (New Zealand Daylight Time)
3/14 09:47:09a Sent M_NUL command args: VER BinkIT/1.56,JSBinkP/1.78,sbbs3.17a/Win32 binkp/1.1
3/14 09:47:09a Sent M_ADR command args: 3:770/330@fidonet 21:1/115 24:400/102 10:10/116 316:64/1 719:570/1
3/14 09:47:09a Got M_NUL command args: OPT CRAM-MD5-98b715ce11a668c760c0468d64891e8d
3/14 09:47:09a Got M_NUL command args: SYS fsxHUB [fsxNet WHQ]
3/14 09:47:09a Got M_NUL command args: ZYZ Paul Hayton
3/14 09:47:09a Got M_NUL command args: VER Mystic/1.12A38 binkp/1.0
3/14 09:47:09a Peer version: Mystic/1.12A38 binkp/1.0
3/14 09:47:09a Got M_ADR command args: 21:1/100@fsxnet 21:1/3@fsxnet 21:1/2@fsxnet 21:1/0@fsxnet 21:0/0@fsxnet
3/14 09:47:09a Sent M_PWD command args: CRAM-MD5-f150c313fe9c64a652f509f8e5a95c6b
3/14 09:47:09a Got M_OK command args: secure
3/14 09:47:09a Unconfigured address 21:1/100@fsxnet
3/14 09:47:09a Unconfigured address 21:1/3@fsxnet
3/14 09:47:09a Unconfigured address 21:1/2@fsxnet
3/14 09:47:09a Unconfigured address 21:1/0@fsxnet
3/14 09:47:09a Unconfigured address 21:0/0@fsxnet
3/14 09:47:09a Sent M_ERR command args: Encryption required
3/14 09:47:09a Unlocking d:\bbs\sbbs\binkd\outbound.015\00010064.bsy.
3/14 09:47:09a Locking d:\bbs\sbbs\binkd\outbound.13c\00240001.bsy
3/14 09:47:09a Lock successful.
3/14 09:47:09a Got M_NUL command args: SYS fsxHUB [fsxNet WHQ]
3/14 09:47:09a Got M_NUL command args: ZYZ Paul Hayton
3/14 09:47:09a Got M_NUL command args: VER Mystic/1.12A38 binkp/1.0
3/14 09:47:09a Peer version: Mystic/1.12A38 binkp/1.0
3/14 09:47:09a Got M_ADR command args: 21:1/100@fsxnet 21:1/3@fsxne 21:1/2@fsxnet 21:1/0@fsxnet 21:0/0@fsxnet
3/14 09:47:09a Sent M_PWD command args: CRAM-MD5-f150c313fe9c64a652f509f8e5a95c6b
3/14 09:47:09a Got M_OK command args: secure
3/14 09:47:09a Unconfigured address 21:1/100@fsxnet
3/14 09:47:09a Unconfigured address 21:1/3@fsxnet
3/14 09:47:09a Unconfigured address 21:1/2@fsxnet
3/14 09:47:09a Unconfigured address 21:1/0@fsxnet
3/14 09:47:09a Unconfigured address 21:0/0@fsxnet
3/14 09:47:09a Sent M_ERR command args: Encryption required
3/14 09:47:09a Unlocking d:\bbs\sbbs\binkd\outbound.015\00010064.bs
3/14 09:47:09a Locking d:\bbs\sbbs\binkd\outbound.13c\00240001.bsy
3/14 09:47:09a Lock successful.
The peer in this case (Mystic) doesn't support encryption. You need to disable encryption for this node in your binkit.ini file (set AllowUnencrypted=true).
disable encryption for this node in your binkit.ini file (set AllowUnencrypted=true).
Hi there :)
For completeness here's the logging from my end at 21:1/100
It's a different polling time but the same result I think
+ 2018.03.14 20:27:36 BINKP 1-C: ERR Encryption required
+ 2018.03.14 20:27:36 BINKP 1-S: EOB
+ 2018.03.14 20:28:06 BINKP 1-Session timeout
I'm new to this party, can you just explain to this n00b what encryption is being used/tested/developed?
Just curious and wondering if Mystic will play
nice with it and/or if it's something I can pass on to James as a FYI and consideration for future inclusion in to the BinkP server that ships with Mystic?
On 2018 Mar 12 13:45:56, you wrote to Digital Man:
Sn> NodeList=d:\bbs\sbbs\fido\nodelist\nodelist.068
Sn> NodeList=d:\bbs\sbbs\fido\nodelist\fsxnet.075
Sn> NodeList=d:\bbs\sbbs\fido\sportnet.068
unless there's a specific update mechanism, the above is going to be painful and quite irritating after a while when you have to keep editing it when new nodelists come out...
The outbound.<hexnum> is a standard, called Binkley-Style-Outbound (or BSO).
okay so is my setting in sbbsecho.ini binkley\flo right then.
Looks fine to me.
question will I have to remove binkit and do a reinstall.
No.
question: do I have to run binkout first then binkpoll or does binkpoll do
both.
binkout runs only automatically when you have outbound echomail or netmail. >>binkout will perform an outbound run and poll.
it may run binkout automatically when you have outbound echomail but
my question is why won't it send the pkt out
What packet? You have to be more specific. The BINKOUT will normally
send files (packets and bundles) for any linked nodes.
I'm not sure what that means. The default is for BINKOUT to run once a
day (at 00:00) unless signaled by a semaphore (which SBBSecho will create/touch anytime there is new outbound mail). The default is also
for BINKPOLL to run once an hours (24 times a day).
See http://wiki.synchro.net/module:binkit for details.
3/14 09:44:49a Locking d:\bbs\sbbs\binkd\outbound.018\01900001.bsy
3/14 09:44:49a Lock successful.
It couldn't connect to f100.n1.z21.binkp.net. That means you'll need a "Host" value for that node in your binkit.ini file. There must be a pending file for that node, but it can't send it because it can't
connect.
3/14 09:47:09a Sent M_ERR command args: Encryption required
3/14 09:47:09a Unlocking d:\bbs\sbbs\binkd\outbound.015\00010064.bsy.
3/14 09:47:09a Locking d:\bbs\sbbs\binkd\outbound.13c\00240001.bsy
3/14 09:47:09a Lock successful.
The peer in this case (Mystic) doesn't support encryption. You need to disable encryption for this node in your binkit.ini file (set AllowUnencrypted=true).
just a question when posting in echo it from Ian Segers normally Sneaky
is there a setting for this samewere.
3/14 09:44:49a Locking d:\bbs\sbbs\binkd\outbound.018\01900001.bsy
3/14 09:44:49a Lock successful.
It couldn't connect to f100.n1.z21.binkp.net. That means you'll need a "Host" value for that node in your binkit.ini file. There must be a pending file for that node, but it can't send it because it can't connect.
ok understand question is the a file same were binkp.net that I can
have a look at thanks
3/14 09:47:09a Sent M_ERR command args: Encryption required
3/14 09:47:09a Unlocking d:\bbs\sbbs\binkd\outbound.015\00010064.bsy.
3/14 09:47:09a Locking d:\bbs\sbbs\binkd\outbound.13c\00240001.bsy
3/14 09:47:09a Lock successful.
The peer in this case (Mystic) doesn't support encryption. You need to disable encryption for this node in your binkit.ini file (set AllowUnencrypted=true).
Okay understand how's this :-
--------------------------------
[21:1/100]
Host=ipv4.agency.bbs.nz
Port=24556
Password=ZK573HY
Poll=true
AllowUnencrypted=true
OutboundRoot=d:\bbs\sbbs\binkd\outbound\
[1m[34mRe[0m[34m: [1m[36mHelp with binkit.js/binkp
[34mBy[0m[34m: [1m[36mSneaky [34mto [36mDigital Man [34mon [36mThu Mar 15 2018 15:19:00[0m
Hi Digital Man
I see I posted a password in my message My big misstake to much of a hurry and busy I am get it changed as soon as paul get my netmail, I have to be more carefull, just letting you now
I see I posted a password in my message My big misstake to much of a hurry and busy I am get it changed as soon as paul get my netmail, I have to be more carefull, just letting you now
It happens to all of us.. once or twice in out lifetimes :) Just be
sure to change it :)
just a question when posting in echo it from Ian Segers normally
Sneaky is there a setting for this samewere.
Yes, "Use Real Names" is a sub-board option in SCFG.
ok understand question is the a file same were binkp.net that I can
have a look at thanks
I'm not really sure what you're asking. binkp.net is a domain name that provides resolutions for FidoNet addresses, but not all of them, to IP addresses. Try "ping f705.n103.z1.binkp.net" (That's my FidoNet address, 1:103/705, converted to binkp.net hostname). If you can resolve it to an IP address, then you don't need a "Host" entry in the binkit.ini file.
You need to disable encryption for this node in your binkit.ini
file (set
AllowUnencrypted=true).
AllowUnencrypted=true
OutboundRoot=d:\bbs\sbbs\binkd\outbound\
That's fine, but is there a reason you're specifying the OutboundRoot there?
there?
I see I posted a password in my message My big misstake to much of a hurry and busy I am get it changed as soon as paul get my netmail, I have to be more carefull, just letting you now
I'm new to this party, can you just explain to this n00b what encryption is being used/tested/developed? Just curious and wondering if Mystic will play nice with it and/or if it's something I can pass on to James as a FYI and consideration for future inclusion in to the BinkP server that ships with Mystic?
There may not be an FTSC document for it but I found crypt.c and crypt.h in the root directory of binkd104.tgz. crypt.c begins with..
* crypt.c -- crypt binkp traffic
| Sysop: | sneaky |
|---|---|
| Location: | Ashburton,NZ |
| Users: | 28 |
| Nodes: | 8 (0 / 8) |
| Uptime: | 189:08:43 |
| Calls: | 2,004 |
| Calls today: | 1 |
| Files: | 11,114 |
| Messages: | 942,265 |